![background image](http://html1.mh-extra.com/html/jai/viscam-1000-system/viscam-1000-system_installation-manual_3216691031.webp)
System Set-Up
25
VISCAM 1000 Systems
Triggered Flash:
When the camera captures an image, the Internal Flash can flash at a different light level. The Internal Flash
Mode and Internal Flash Intensity settings affect this usage.
Internal Flash Mode:
There are three options available as of EN APP firmware version January 2015 (see Figure 27):
Figure 27.
LED-1000 Mode selections in ENSetup
- Off: the internal LED light (LED-1000) is always off
- On Always: internal LED light is always flashed when triggered. The light is needed for Vehicle Detector to
work properly therefore this is the recommended setting.
- Auto Light Level: light level can be controlled automatically with the help of ALC or ADR. The “Internal Flash
Auto Intensity …” settings let you fine tune the light level (see Figure 28).
Figure 28.
LED-1000 Flash Mode and Intensity settings in ENSetup
When Auto Light Level is selected the following settings take effect: