10
Installing the VIS
Figure 10.
VJP-300 J-Panel X1 and X2 connectors
The connectors on the VJP-300 J-Panel are pluggable terminal blocks with pin spacing of 3.81 mm/ 0.15
inch from WAGO. The contacts are spring loaded. See Figure 11.
Figure 11.
Terminal block
When mounting the wire into the connector the wire is stripped 7mm. The connector spring is released by
using one of two tools:
WAGO 734-230
JAI part number 10010134
WAGO 210-250
JAI part number 10014057
The wire is inserted and the spring is activated.
