![background image](http://html1.mh-extra.com/html/jai/viscam-1000-system/viscam-1000-system_installation-manual_3216691019.webp)
Installing the VIS
13
VISCAM 1000 Systems
Figure 15.
Connect TNL-50 wires to terminal blocks X5 and X12 on I/O Board
Table 5
TNL-50 flash unit connection in VISCAM AIO.
Pin X5
Signal
Wire Color
Description
Connection to
1
I/O Gnd
Black
I/O Board Gnd
Pin 2 (see Figure 15)
2
Gnd
Black
Flash Gnd
Flash ground (negative power terminal)
(GROUND)
3
Out
White
Strobe out
Strobe input on flash unit (STROBE OUT)
4
Stat
Blue
Strobe status
Status output from flash unit (STROBE
STATUS)
5
FPWR
Red
Flash power
Power from I/O Board to output circuit on
I/O Board (pin 6)
6
24V
Red
IO board 24V (Fused
0.5A)
Pin 5 (see Figure 15)
Pin X12
Signal
Wire Color
Description
Connection to
7
RS-485+
Green
RS-485+
For controlling TNL-50 Parameters
8
RS-485-
Orange
RS-485-
For controlling TNL-50 Parameters