JAI SW-8000Q-10GE, User Manual

Page: 28 / 74

Exposure Mode
The following operation modes are available on the camera.
Image Output Timing
■ Trigger Control
In this camera, the following control is performed by the external trigger signal.
Exposure Mode Trigger Mode
OFF
ON
OFF
ON
Trigger Width ON
Operation mode
OFF
Timed
Trigger Selector Description
FrameStart Imaging of one frame is started by input of external trigger signal.
AcquisitionStart Start image acquisition in response to the external trigger signal input.
AcquisitionEnd Stop image acquisition in response to the external trigger signal input.
FrameTransferStart Output acquired images at a specified timing in response to an external
trigger signal input.
* There is a limit to the number of image frames that can be stored
internally.
Example : (PixelFormat RGBa8, Width 8192, Height 4096)
It is possible to hold 1.5 frames of images.
Line Start Imaging of one line is started by input of external trigger signal.
SW-8000Q-10GE/SW-8000Q-SFP
— 28 —