JAI SW-8000Q-10GE, User Manual

Page: 46 / 74

Chunk Data Function
The Chunk Data function adds camera configuration information to the image data
that is output from the camera. Embedding camera configuration information in the
image data allows you to use the serial number of the camera as a search key and
find specific image data from among large volumes of image data. In addition, when
images are shot with a single camera in sequence under multiple setting conditions,
you can search for images by their setting conditions.
■ Configuring Chunk Data
1
Set [ChunkModeActive] to [True].
2
Select the items of information you want added to image data with
[ChunkSelector], and set [ChunkEnable] from [False] to [True].
The Chunk Data function settings cannot be changed during image output. To change
the settings, stop Acquisition.
Caution
Note
When [ChunkModeActive] is set to [True], [ChunkImage] is automatically set to
[True].
*) For items that can be added to image data as Chunk Data, refer to
[n) ChunkDataControl] in the setting item list.
Delayed Readout
Delayed readout allows images captured by a [Frame Start] trigger command to be
stored temporarily inside the camera (delayed readout buffer) and read out using a
[FrameTransferStart] trigger after capture.
This function is useful when executing triggers simultaneously on multiple cameras.
Note
This function imposes a heavy processing load on the network bandwidth, as images
from multiple cameras are read out simultaneously.
* About delayed readout buffer size, refer to “Trigger Control”.
SW-8000Q-10GE/SW-8000Q-SFP
— 46 —