Action Control Function
The Action Control Function is a function that executes the pre-configured action
when the camera receives action commands. Action commands can send both unicast
and broadcast messages and give instructions for actions to multiple cameras
simultaneously by broadcasting them. A camera that has this function can even give
instructions for actions to different types of multiple cameras. Although this function
includes jitter and delays, it is useful for controlling multiple cameras simultaneously.
Actions are performed when the following three conditions are met.
1. ActionDeviceKey set to the camera and ActionDeviceKey in the action command
match
2. ActionGroupKey set to the camera and ActionGroupKey in the action command
match
3. ActionGroupMask set to the camera and GroupMask in the action command
perform AND operation, and the result is not 0.
■
About the settings of the camera
1. Specify ActionDeviceKey.
2. Then, specify two actions that can be configured on the camera.
Action1
Select 1 in ActionSelector.
Specify ActionGroupMask [ActionSelector].
Specify ActionGroupKey [ActionSelector].
Action2
Select 2 in ActionSelector.
Specify ActionGroupMask [ActionSelector].
Specify ActionGroupKey [ActionSelector].
3. Set triggers (AcquisitionStart, AcquisitionEnd, FrameStart,
AcquisitionTransferStart) to Action1 and Action2.
■
Setting example
Assume that the following settings have been pre-configured on the camera.
ActionDeviceKey
: 0x00001001
ActionGroupMask[1]
: 0x00000011
ActionGroupKey[1]
: 0x00000001
ActionGroupMask[2]
: 0x00000111
ActionGroupKey[2]
: 0x00000002
When the camera receives action commands (ActionDeviceKey:0x00001001,
ActionGroupMask:0x00000011, ActionGroupKey: 0x00000002), Action2 is executed.
When the camera receives action commands (ActionDeviceKey:0x00001001,
ActionGroupMask:0x00000011, ActionGroupKey: 0x00000001), ActionDevice and
ActionGroupKey[1] match. However, the result of AND operation performed by
ActionGroupMask is 0. Therefore, in this case, neither Action1 nor Action2 is
executed.
SW-8000Q-10GE/SW-8000Q-SFP
— 48 —
Summary of Contents for SW-8000Q-10GE
