JAI SW-8000Q-10GE, User Manual

Page: 63 / 74

Effective pixels 8192 pixel × 4（R, G, B, NIR）
pixel size 3.75 μm × 5.78 μm
RGBa8 66Hz* 〜37kHz (0.1Hz/step)
YU Mono8 66Hz* 〜37kHz (0.1Hz/step)
RGB8 + Mono8 66Hz* 〜36kHz (0.1Hz/step)
ROI(Horizontal)/Binning
Binning Horizontal1(Off)
Width : 16 〜 8192 pixels (16 pixels/step)
OffsetX : 0 〜 8176 pixels (16 pixels/step)
Binning Horizontal2(On)
Width : 8 〜 4096 pixels ( 8 pixels/step)
OffsetX : 0 〜 4088 pixels ( 8 pixels/step)
ROI(Vertical)
Hieght : 1 〜 4096 lines ( 1 line/step)
Offset : 0 〜 4095 lines ( 1 line/step)
Pixel Format
1 single-stream RGBa8
2 dual-stream Stream 0: RGB8, RGB10V1Packed, RGB10p32,
YUV422_8, YUV422_8_UYVY
Stream 1: Mono8, Mono10Packed
Off Line Period - 3.29μs + 0.85μs (1.0 μs/step)
Timed 3.0μs 〜 15.149ms (1.0 μs/step)
Trigger Width 1.8μs 〜 1s (1.0 μs/step) (Trigger Width + 0.85μs)
Acquisition AcquisitionStart / AcquisitionEnd
Exposure FrameStart / LineStart
Transfer FrameTransferStart
Line rate
Item SW-8000Q-10GE/SW-8000Q-SFP
Image sensor
Four 8192 pixel line sensors
Synchronization Internal
Communication Interface 10GBase-T, 5GBase-T, 2.5GBase-T, 1000Base-T
Digital image output format
Video Dark S/N ratio
G-ch : 53 dB or more (when Gain = 0 dB, 10bt, ExposureTime=525μs, IndividualGainMode=off)
NIR-ch : 55 dB or more (when Gain = 0 dB, 10bt, ExposureTime=525μs, IndividualGainMode=off)
Gain adjustment
Digtal ︓ IndividualGainMode Off : Digital All x 1 〜 x 32 ( 0dB 〜30dB)
Digital Red x 0.63 〜 x 4 (-4dB 〜 12dB)
Digital Blue x 0.63 〜 x 4 (-4dB 〜 12dB)
Digital NIR x 0.63 〜 x 4 (-4dB 〜 12dB)
IndividualGainMode On︓ Digital Green x 1 〜 x 64 (0dB 〜 36dB)
Digital Red x 1 〜 x 64 (0dB 〜 36dB)
Digital Blue x 1 〜 x 64 (0dB 〜 36dB)
Digital NIR x 1 〜 x 64 (0dB 〜 36dB)
Acquistion Mode SingleFrame, MultiFrame, Continuous
Exposure Mode
Trigger Selector
Line4(TTL In1), Line5(Opt IN1), Line10(TTL In2), Line13(TTL In3), PulseGenerator0-3,
UserOutput0-3, Action0-3, LogicBlock0-1, EncoderTrigger
Object illuminance (min.)
Responsivity
214.5 lx @ 7800 K
(Gain 30 dB, 525 μs exp., 50% video, Light source White LED7800K)
41 DN/nJ/cm2 (Typ)
(G channel, 10-bit @ 550 nm, 0 dB gain)
24 DN/nJ/cm2 (Typ)
(NIR channel, 10-bit @ 800 nm, 0 dB gain)
12-pin: TTL input, OPT input 10-pin: TTL input
Positive / negative logic switchable.
Minimum trigger width: 50ns and more
Black level adjustment
Manual
DigitalAll －133 〜＋ 255 (LSB@12bit)
DigitalRed －64 〜 ＋64 (LSB@12bit)
DigitalBlue －64 〜 ＋64 (LSB@12bit)
DigitalNIR －64 〜 ＋64 (LSB@12bit)
Default setting: Output black level at 0 (33LSB during 10-bit)
Trigger inputs
Specifications
*) When taking a trigger signal from the outside, there is no limitation on the minimum value.
SW-8000Q-10GE/SW-8000Q-SFP
— 63 —