![background image](http://html1.mh-extra.com/html/jai/rmc-675/rmc-675_user-manual_3220520068.webp)
RMC-675/RMC-673
68
Appendix
8.3.64
MCP Gate Disable
Function
Command String
Camera Response
MCP Gate Disable/Enable
:MDG=[D]<cr> :o<cr>
Disable or enable the MCP Gate. [D] is the enable parameter.
0 = MCP Gate Disabled.
1 = MCP Gate Enabled.
Get MCP Gate Disable/Enable
State
:MDG?<cr> :oMDG[D]<cr>
Enquire current MCP Gate Enable/Disable state. [D] is the
current state.
0 = MCP Gate Disabled.
1 = MCP Gate Enabled.
8.3.65
Multifunction Input
Function
Command String
Camera Response
Set Multifunction Input
:MFI=[D]<cr> :o<cr>
Set the Multifunction Input mode. [D] is the mode parameter.
0 = VD.
1 = CSYNC.
2 = Trigger.
Get Multifunction Input
:MFI?<cr> :oMFI[D]<cr>
Enquire current Multifunction Input mode. [D] is the current
mode value.
0 = VD.
1 = CSYNC.
2 = Trigger
8.3.66
Multifunction Input Termination
Function
Command String
Camera Response
Set Multifunction Input
Termination
:MFT=[D]<cr> :o<cr>
Set the Multifunction Input termination. [D] is the termination
parameter.
0 = HiZ.
1 = 75 ohm.
Get Multifunction Input
:MFT?<cr> :oMFT[D]<cr>
Enquire current Multifunction Input termination. [D] is the
current termination setting.
0 = HiZ.
1 = 75 ohm.
Summary of Contents for RMC-675
Page 2: ......
Page 13: ...Hardware Introduction 13 RMC 675 RMC 673 Figure 1 RMC 675 RMC 673 System Configuration ...
Page 81: ......