![background image](http://html1.mh-extra.com/html/jai/rmc-675/rmc-675_user-manual_3220520055.webp)
Appendix 55
RMC-675/RMC-673
8.3.16
Bright Speed
Function
Command String
Camera Response
Set Bright Speed
:BTS=[DD]<cr> :o<cr>
Set the BST value (bright speed for ALC). [DD] is the level
value with a range of 1-100. This command applies only to
camera models TM-770.
Get Bright Speed
:BTS?<cr> :oBTS[DD]<cr>
Enquire current BTS value (bright speed for ALC). [DD] is the
current value with a range of 1-100. This command applies
only to camera models TM-770.
8.3.17
Camera Model Number
Function
Command String
Camera Response
Get Camera Model No
:CAM?<cr> :o[DDD]<cr>
Enquire current Camera Model. [DDD] is a string representing
the model number. Maximum length is 10 characters.
8.3.18
CD1,2,3,4 Column Defect Address
Function
Command String
Camera Response
Set Column Defect Address
:CDx=[DDDD]<cr> :o<cr>
Set address value for column defect 1,2,3, or 4. The “x” in the
command string is 1,2,3, or 4. [DDDD] is address value.
User access to control of the DFC feature is determined by the
SB2 setting. If “DFC=: is received, but SB2=0, the command
has no effect but does not return an error code.
Get Column Defect Address
:CDx?<cr> :oCDx[DDDD]<cr>
Enquire current column defect address for defect 1,2,3, or 4.
“x” in the command string is 1,2,3, or 4. [DDDD] is the defect
address.
8.3.19
Defect Indicator
Function
Command String
Camera Response
Set Defect Indicator State
:CDI=[D]<cr> :o<cr>
Turn Defect Indication on/off. [D] is the state value.
0 = Defect indication off.
1 = Defect indication on .
Get Defect Indicator State
:CDI?<cr> :oCDI[D]<cr>
Enquire current Defect Indication state. [D] is the current
state value.
0 = Defect indication off.
1 = Defect indication on.
Summary of Contents for RMC-675
Page 2: ......
Page 13: ...Hardware Introduction 13 RMC 675 RMC 673 Figure 1 RMC 675 RMC 673 System Configuration ...
Page 81: ......