Appendix 67
RMC-675/RMC-673
8.3.61
ALC Window – Lower Right X
Function
Command String
Camera Response
Set ALC Window Lower Right
X value
:LRX=[DDD]<cr> :o<cr>
Set the lower right X co-ordinate for the ALC control window.
[DDD] is the size parameter with a range of 3-768. This
command applies to camera models TM-770, RMC-673, and
RMC-675.
Get ALC Window Lower Right
X value
:LRX?<cr> :oLRX[DDD]<cr>
Enquire current lower right X co-ordinate for ALC control
window. [DDD] is the current value with a range of 3-768.
This command applies to camera models TM-770, RMC-673, and
RMC-675.
8.3.62
ALC Window – Lower Right Y
Function
Command String
Camera Response
Set ALC Window Lower Right
Y value
:LRY=[DDD]<cr> :o<cr>
Set the lower right Y co-ordinate for the ALC control window.
[DDD] is the size parameter with a range of 3-494. This
command applies to camera models TM-770, RMC-673, and
RMC-675.
Get ALC Window Lower Right
Y value
:LRY?<cr> :oLRY[DDD]<cr>
Enquire current lower right Y co-ordinate for ALC control
window. [DDD] is the current value with a range of 3-494.
This command applies to camera models TM-770, RMC-673, and
RMC-675.
8.3.63
Save/Restore Camera State
Function
Command String
Camera Response
Save Camera State
:WSTA=[D]<cr> :o<cr>
Write the camera state to one of two user state files. [D] is
the file selection.
1 = User_1.
2 = User_2.
Restore Camera State
:LSTA=[D]<cr> :o<cr>
Load camera state. [D] is the state file selection.
0 = Factory defaults.
1 = User_1.
2 = User_2.
Summary of Contents for RMC-675
Page 2: ......
Page 13: ...Hardware Introduction 13 RMC 675 RMC 673 Figure 1 RMC 675 RMC 673 System Configuration ...
Page 81: ......
