JAI RMC-675, User Manual

Page: 14 / 82

RMC-675/RMC-673
14 Hardware Installation
2 Installation
The following instructions are provided to help you to set up your video camera system quickly and easily. It is
suggested that you read through these instructions prior to unpacking and setting up your camera system
2.1 Getting Started
2.1.1 Unpacking Instructions
It is recommended that the original packing cartons for the cameras and lenses be saved in case there is a need
to return or exchange an item. It is also recommended that any equipment being sent to another location for field
installation be bench tested to assure that everything is fully operational as a system.
2.1.2 Components List
Please begin by checking your order against the Components List (below) to assure that you have received
everything as ordered, and that nothing has been overlooked in the packing materials. If any item is missing,
please contact your JAI, Inc. representative immediately.
•
RMC-675 or RMC-673 camera
•
RMC-675/RMC-673 data sheet (Download from www.jai.com )
•
RMC-675/RMC-673 Operations Manual (Download from www.jai.com )
•
RMC-675/RMC-673 Camera Control Software (Download from www.jai.com )
2.1.3 Accessories
Following is a list of additional accessories or equipment that may be recommended or required for your particular
application. Please check with your JAI, Inc. representative prior to the installation of your video system to
determine what you might need.
•
Power Cable: 15P-02-9P-FULL or 15P-02-9P
•
Power Supply: PD-12UU
•
Tripod Mounting Kit: TP-50
(for dimensions go to:
www.jai.com/EN/CameraSolutions/Products/Accessories/Pages/Home.aspx )
2.2 Camera Setup
2.2.1 Connector Pin Configurations
2.2.1.1 15-Pin Connector
The RMC-675/RMC-673 have a 15-pin connector for power input. The pins handle a number of input and output
functions, which will be discussed further in other sections.
Figure 2. 15-Pin Connector