![background image](http://html.mh-extra.com/html/jai/lq-401cl/lq-401cl_user-manual_631567009.webp)
LQ-401CL
8
4. Locations and functions
4.1. Locations and functions
Fig. 1 Location of external features
1 Lens mount
M52 mount (*1)Note)
2 Camera Link connector 1
base connector (1)
(*2)Note)
3 Camera Link connector 2
medium connector (2) (*2)Note)
4 12-pin Hirose connector
DC +12, External trigger and RS-232C
5 DIP switch
SW-1 ( refer to chapter 4.2 for the details)
6 Button
For one-push auto white balance (Gain based)
7
LED indicator
Power, trigger input and operation indications
8 Camera mounting holes
8 x M3, depth 5mm (*3) Note)
*1) Note:
Rear protrusion on M52 mount lens must be less than 13mm.
F mount is also available. Rear protrusion for F mount lens is the same as M52 mount.
*2) Note: When a Camera Link
TM
cable is connected to the camera, please do not excessively tighten
screws by using a driver. The Camera Link receptacle on the camera might be damaged.
For security, the strength to tighten screws is less than 0.291 Newton meter (Nm).
Tightening by hand is sufficient in order to achieve this.
*3) Note:
The depth of mounting hole is 5 mm. If the longer screws than 5 mm are used, they may
damage the circuit board inside.