![background image](http://html.mh-extra.com/html/jai/lq-401cl/lq-401cl_user-manual_631567069.webp)
LQ-401CL
68
Binning
Available (line rate is not increased)
Test pattern
0: Color Bar 1: Gray 1 2: Gray 2 3: White (890 LSB)
Signal processing
circuit
1. Pixel gain correction: Pixel Response Non
Uniformity(PRNU),Dark Signal Non Uniformity(DSNU)
2. Shading compensation : ON / OFF
Visible: Flat shading compensation or Color shading
compensation can be selected
NIR: Flat shading compensation or color shading compensation
(Adjust using G channel as the reference) can be selected
3. Linear matrix : R,G,B color compensation, no compensation for
NIR
4. Noise reduction
Operation mode
No-shutter, Shutter-Select, Pulse Width Control (PWC)
Trigger input
(note2)
12-Pin : 4.0
±
2.0Vp-p
TTL or
Camera Link : LVDS (CC1)
Possible to change negative logic or positive logic
Minimum trigger width :
External trigger: more than 500 ns,
PWC : more than 61.8 μs
Sync output
(open termination)
Camera Link LVAL, DVAL, EEN
Hirose 12-Pin XEEN (negative logic) 4.0Vp-p (no termination)
Communication
interface
(Note3)
EIA-644: Camera CC1 or
RS-232C: 12-Pin connector
Baud rate : 9600 bps
Interface is switched by SW1 located rear panel.
Field update
Available
Power
DC +12V to +24V±10%
750mA (internal trigger, line rate 58.85 μs, 0dB, lens covered,
+12V input)
Note: Use a power supply capable of providing more than 3A.
Lens Mount
M52 mount (Standard) or Nikon F-Mount(Optional)
Maximum allowed rear protrusion on lenses:
M52 Mount :
13mm
Nikon F-Mount: 13 mm
Flange back
M52 Mount :
46.5mm Nikon F-Mount : 46.5mm
Lenses without iris rings cannot be used.
Optical axis
Center
±
0.1 mm (max)
Operating temperature
/humidity
- 5
C to +45
C / 20 to 80% (non-condensing)
Storage temperature
/humidity
-25
C to +60
C, 20 to 80% (non-condensing)
Vibration
3G (20Hz to 200Hz XYZ direction)
Shock
50G
Regulation
CISPR Pub.22
(EN55022)
CISPR Pub.24
FCC Part15 Class B
IEC61000-4-2
conforming to Level 4
(
Contact discharge:8 kV,
Air discharge:15 kV
)