LQ-401CL
25
The following is the result of a negative setting
The following is the result of a positive setting.
Fig. 23 Operation of the compensation
Area
:
This command specifies the area in which pixel shifting will be applied.
The image is divided into 16 blocks, with each block representing 256
pixels. Enter a number from 1 to 8 to specify the inner edge of the pixel
shifted area. The value is automatically mirrored on both the left and right
sides of the image. If the left side pixel value is +/-1, only Area setting (1
to 6 blocks in fig. 25) is used and all pixels in this area will be shifted by 1
pixel. All pixels outside this area (7 and 8, white blocks) will remain un-
shifted. If the left side pixel value is +/-2 or +/-3 use the 2
nd
Pixel Block
and 3
rd
Pixel block fields to define a gradual shift from the edge to the
center of the image.
2nd pixel block
:
If the left side pixel value is 2 or more pixels, enter a number in this field
to specify the block where the compensation will transition from a 2-pixel
shift to a 1-pixel shift. The value entered is automatically mirrored on
both the left and right sides of the image. Blocks 1 to 4 in fig.25, are
where the 2 to 1-pixel shift will be applied.
3rd pixel setting :
If the left side pixel value is set at +/-3, enter a value in this field to
specify the block where the compensation will transition from a 3-pixel
shift to a 2-pixel shift. The value entered is automatically mirrored on
both the left and right sides of the image. Blocks shown in blue (1 and 2
block) are where the 3-pixel shift will be applied.
Setting example:
Left side = -3 or 3
Area : 6, 2nd : 4, 3rd : 2
4096th Pixel
Fig. 24 Setting example
