̶
24
̶
GO-2400M-PMCL / GO-2400C-PMCL
Step 7: Saving the Settings
The setting values configured in Control Tool will be deleted when the camera is turned off. By storing
current setting values to user memory, you can load and recall them whenever necessary. You can
save up to three sets of user memory settings (User Set1 to 3).
User memory
Temporary memory
Current
setting
values
Control
Tool
Save
User Set1
User Set2
User Set3
Note
The setting values are not saved to the computer (Control Tool).
■
To save user settings
1
Stop image capture.
2
Expand [User Set Control] and select the save destination ([User Set1] to [User Set3]) in
[User Set Selector].
Note
The factory default setting values are stored in [Default] and cannot be overwritten.
Caution
Settings can only be saved when image capture on the camera is stopped.
