Pro II: Multi-IO-Module
Pro II-MIO-D12 Rev. E
ADwin
48
ADwin-Pro II
Hardware, manual Dec. 2018
TiCo processor
The module provides the freely programmable
TiCo
processor with 28kiB pro-
gram memory, and 28KiB data memory. The internal memory serves as data
and program memory. You program the
TiCo
processor with
TiCoBasic
.
The
TiCo
processor has access to all analog and digital input and output chan-
nels, as does the
ADwin
CPU. Find more information about use and program-
ming of the
TiCo
processor in the
TiCoBasic
manual.
If you store a
TiCoBasic
program in the
TiCo
bootloader, the program is auto-
matically loaded into the
TiCo
processor and started on power-up. Thus, the
module can run on its own and independently from the CPU module of the
ADwin-Pro II
system.
Technical Specification
Transistor Outputs
Output channels
12
Switching voltage V
CC
5…30V DC durch externe Spannungsversorgung
Switching current
200mA max. per channel
Voltage drop
0.5V
Switching time
2.5µs
Isolation
42V channel-channel / channel-GND
common ground for all OPT and TRA channels
Optocouple Inputs
Input channels
12
Input current
typ. 3.5mA / max. 7.5mA
Input voltage range
(selectable via jumpers)
0…5V / 0…12V / 0…24V
Switching threshold for
0-low
0…0.8V / 0…1.6V / 0…3.2V
Switching threshold for
1-high
4.5…5V / 10…12V / 20…24V
Input over-voltage
-5V … 8V / -5V … 16V / -5V … 30V /
Switching time
100ns
Isolation
42V channel-channel / channel-GND
common ground for all OPT and TRA channels
Counter
Number
2 universal counter blocks
Counter resolution
32 bit
Reference clock
50MHz
Clock frequency four
edge evaluation
12.5MHz max. (at 90° phase-shift of the signals)
C l o c k f r e q u e n c y
up/down counter
15MHz max.
Reference frequency
PWM analysis
100MHz
Input / output level
1 counter compatible to RS422/485 (5V differen-
tial, 120
Ω
bus terminating resistor)
1 counter via optocouples
Fig. 33 – Pro II-MIO-D12 Rev. E: Specification