Pro II: Digital-I/O Modules
Pro II-DIO-32 Rev. E
ADwin
106
ADwin-Pro II
Hardware, manual Dec. 2018
Programming in ADbasic
The module is comfortably programmed with
ADbasic
instructions. The
instructions are described in
ADbasic
online help and Pro II Software manual.
The include file
ADwinPro_All.inc
contains instructions for the following
functions:
V
IH
min. 2V
V
IL
max. 0.8V
I
IH
max. 1µA
I
IL
max. 0.01mA
Voltage range
-0.5V … +5.5V
Output current
max. ±35mA per channel, max. ±70mA per block
(8 channels) via V
CC
or GND
Event input
TTL logic
Power up status
All channels as inputs
Connector
37-pin D-Sub female connector
Fig. 91 – Pro II-DIO-32 Rev. E: Specification
Function
Instructions
Configure input/outputs
P2_DigProg
Query input signals
P2_Digin_Long
Use latch register
P2_Dig_Latch
P2_Dig_Read_Latch
P2_Dig_Write_Latch
Monitor edges of input chan-
nels
P2_Digin_FIFO_Enable
P2_Digin_FIFO_Read
P2_Digin_Fifo_Read_Fast
P2_Digin_FIFO_Read_Timer
P2_Digin_FIFO_Clear
P2_Digin_FIFO_Full
Query edges of input channels
P2_Digin_Edge
Set and read back output sig-
nals
P2_Digout
,
P2_Digout_Bits
P2_Digout_Long
P2_Get_Digout_Long
Synchronize
P2_Sync_All
,
P2_Sync_Enable
P2_Sync_Stat
Use LED
P2_Check_LED
,
P2_Set_LED
Use interrupt and event inputs
P2_Event_Enable
,
P2_Event_Read
P2_Event_Config
