Page 69
J-400
13.2 Programming the Secondary Filter Cycle
1. To program the Secondary Filter
cycle, press button C (Figure B, pg.
67). This cycle will activate the
main jet pump to run for additional
filtration when programmed (Figure
E). If you choose not to use this
feature, please skip this section.
2. When you enter the Secondary Filter
Cycle submenu, the “Day Settings”
will be selected (Figure F). From this
menu, you can set the day, time, and
duration. Press the Splash button on
the Quad Keypad to confirm
selection.
3. You can choose the day(s) you
would like to run a secondary filter
cycle (Figure G). Press the Up or
Down button on the Quad Keypad to
scroll through and change the days
you would like the filtration to run.
Press the Left or Right button to turn
“ON” (
) or “OFF” the filtration for
that day.
4. Press the Splash button to save settings. Then the display will revert
to the Secondary Program Menu (Figure H).
5. Press the Down button on the Quad
Keypad to select “Start Time” (Figure
H). Press the Left or Right button on
the Quad Keypad to select the time
you wish the spa to filter. Press the
Down button on the Quad keypad to
access the “Duration” setting.
Note:
If you are using a standard 12-
Hour period, you will see the hour displayed as “1PM.” For
the 24-Hour period it will read “1300.”
Primary
Secondary
Press to
reset to default
SETTINGS 2
OFF
3
2
Figure E
Figure F
SECONDARY
Start Time
Day Settings
Duration
Select
Day Settings
Press to Enter
3
1PM
OFF
Select
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Press to Save
Monday
OFF
OFF
OFF
OFF
OFF
OFF
OFF
3
SECONDARY
Figure G
Select
3
SECONDARY
Start Time
Day Settings
Duration
Press to Save
Start Time
1AM
OFF
Figure H
