Page 96
J-400
20.1 Optional J-1000 Wireless Remote
A.
The Optional J-1000 Remote (Included with
models equipped with the Audio System)
Most spa functions can be controlled with the
remote (Figure A). The sleek modern design and
easy navigation make this remote a great addition to
your spa enjoyment. Listed below are the remote
features, how to access and control them. General
features of the remote are:
• The remote does not have a touch screen.
• When you first use the remote, it needs to be
bonded to the spa.
• When not in used or after any 15 seconds of
inactivity the remote goes into a “Sleep” status
until activated. The backlighting and display will
turn off.
• When activated the remote checks and verifies that it and
the control system are bonded.
• When activated the remote checks to see if any of the components
are running. If so, the component icon will blink on the remote LCD
display to alert you that those components are activated. The water
temperature is displayed on top of the screen, while the main menu
is displayed.
• Pressing any key will activate the remote; the backlight will turn on
and illuminate the keys and display. This lighting has a 10 second
time-out period if no keys are pressed.
Note:
Remote unit is
water resistant not waterproof
, therefore the unit
should never be left in the spa while the cover is on and spa is not in use.
Displays for the remote will vary depending on the hot tub model.
WARNING:
RISK OF ELECTRICAL SHOCK HAZARD
EXISTS AND EQUIPMENT DAMAGE!
Never install or
remove electrical devices while hands are wet or while sitting
partially immersed or fully immersed in spa!
CAUTION:
Never leave electrical devices in the Docking
Station when spa is not is use to prevent damage from out-
door elements! Never spray Docking Station with a pressur-
ized water hose for any reason! Damage to the device or spa
stereo system caused by water intrusion is not covered under
the manufacturer’s warranty! Damage to Docking Station port
or electrical devices due to excessive force or improper align-
ment during installation or removal from Docking Station is not
covered under warranty.
Figure A