Page 65
J-400
3. When you enter the submenu
(Figure O), you can choose the
day(s) you would like “Program B” to
run for a heating cycle. Press the Up
or Down button (on the Quad
Keypad) to scroll through and change
the days you would like the heating to
activate. Press the Left or Right
button to turn “ON” (
) or “OFF” the heating for that
day.
4. Press the Splash button to save settings. Then the display will revert
to the Program B Menu (Figure P).
5. Once back to the “Program B” Main
Menu, press the Down button on the
Quad Keypad to select “Start Time”
(Figure P). Press the Left or Right
button on the Quad Keypad to select
the time you wish the spa to run.
Press the Down button on the Quad
keypad to access the “Duration”
setting.
Note:
If you are using a standard 12-Hour period, you will see the hour
displayed as “1PM.” For the 24-Hour period it will read “1300.”
6. Now you will need to adjust the
“Duration” (Figure Q) of the cycle.
The duration range is from 0 (OFF) to
6 hours. Press the Left or Right
button on the Quad Keypad to make
your adjustment(s) in increments of 1
hour.
Note:
The default “Duration” is OFF.
7. Press the Splash button on the Quad Keypad to save
your changes and return to the Heating Menu.
9. Press button D to exit the Heating
Menu and return to the Settings 1
Main Menu. If you have programmed
both heating cycles and the settings
have been accepted, you will see
the two program icons next to word
“Heating” on the display (Figure R).
If only one cycle was programmed,
there will only be one icon.
Figure O
Select
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Press to Save
Monday
OFF
OFF
OFF
OFF
OFF
OFF
PROGRAM B
2
B
PROGRAM B
Start Time
Day Settings
Duration
Select
Start Time
1PM
Press to Save
2
B
OFF
Figure P
PROGRAM B
Start Time
Day Settings
Duration
Select
Press to Save
Duration
OFF
2
B
1PM
Figure Q
Press to
set filter or UV timer
Heating
UV Light
Filter
OFF
0 Days
SETTINGS 1
1
2
A
B
Figure R