Page 98
J-400
AUX
= AUX Icon:
Allows you to access files on an auxiliary device.
Devices must be connected in order for the remote to operate
some functions.
BT
= Bluetooth Icon:
Allows you to access files on a Bluetooth
device. This icon will only appear if a Bluetooth device is
connected.
1.
Bonding the remote and spa
When you first use the remote, it will
need to be bonded to the spa for opera-
tional use. To bond the remote:
• Press button D and the Down button,
at the same time, for 2 seconds (Figure B).
• The programming instructions will appear on the
control panel LCD Display (Figure B).
• You will need to press the keys below on the
remote unit, not the control panel on the spa, in
the following sequence (Figure C):
1. Return, up
2. Return, up
3. Return, up
4. Select
• After you press the Select button,
Figure D will appear on the control
panel LCD Display.
• Finally, Figure E will appear once the
bonding has finished. To clear the
LCD display, press any key on the
control panel.
Remote display for spas
with the stereo option
Remote display for spas
without the stereo option
REMOTE CONTROL
CONNECTION
Press the keys below
Return, up
Return, up
Return, up
Select
DOWN
D
Figure B
REMOTE CONTROL
CONNECTION
Figure D
REMOTE CONTROL
CONNECTION
Enjoy
Figure E
RETURN
UP
SELECT
Figure C
