Was this useful?
How to connect my Jabra PRO 92x with Cisco 8961, 9951, 9971
Prerequisite:
Jabra PRO 92x + Jabra Link 14201-30
In combination with one of the following phones:
Cisco 8961 / 9951 / 9971
Important
: The following prerequisites must be met in order to use remote call control:
Cisco Unified Communications Manager (CUCM) from release 7.1 (3a) SU1 or higher
Cisco Call Manager Express from version 4.1 and phone firmware 8.3.3. When
downloading (Cisco) the required IOC version will be marked.
Connection:
1.
Connect the 1-sided
end (USB plug) of the EHS adapter to the USB socket of your
phone.
2.
Plug the RJ10 plug into the socket marked with a “phone” symbol and the RJ45 plug into
the base socket marked with "AUX".
Now you can setup the headset for your phone with the automatic configuration
or manually.
Automatic configuration:
To start the automatic configuration, please let someone call you on this phone; wait at least 10
seconds before you pick up the phone. Now the appropriate EHS mode should be set up.
If the automatic configuration does not work, please select the DHSG mode manually. See
manual for instructions.
Base setup:
Summary of Contents for Pro 92 Series
Page 48: ......
