2.
Connect the split end of the DHSG cable with the Jabra PRO 92x base as follows. Plug
the RJ10 plug into the socket marked with a complete “phone” symbol and the RJ45 plug
into the base socket of the Jabra PRO 92x marked with "AUX".
Now you can setup the headset for your phone with the automatic or manual configuration.
Automatic configuration:
To start the automatic configuration, please let someone call you on this phone; wait at least 10
seconds before you pick up the phone. Now the appropriate EHS mode should be set up.
If the automatic configuration did not work, please manually select the DHSG mode. (See
Manual).
Base setup:
Set the phone setup switch to position "A".
Microphone volume setting:
Summary of Contents for Pro 92 Series
Page 48: ......
