Jabiru Aircraft
Pty Ptd
Aircraft Service Manual
Jabiru J230-C
REVISION
0
Dated : Feb 2006
Issued By: RAS
Page: 109 of 171
L:\files\Technical_manuals\J230_J430\J230.J430_Work_files\J230-C_Tech_Rev_1.doc
Print Date: 14/01/2009 4:41:00 PM
11.1.2
CLEANING AND INSPECTION
1.
Wipe the inner surfaces of the cowlings with a cloth saturated with Mineral
Turpentine.
2.
Wash with a solution of mild soap and water and rinse thoroughly. After cleaning,
inspect for dents, burns, rubbing marks, cracks and any signs of delamination.
3.
Inspect cowling camloc mounts for rigidity & bonding & for wear. Inspect locking
pins for damage. Inspect rubber grommets in firewall for wear or damage.
4.
Replace any damaged or worn parts with new parts.
11.1.3
REPAIR
Repair is limited to replacement cam locks. Rivets fixing cam lock anchor lugs should be
backed with washers.
11.2 ENGINE
The engine is a JABIRU, 6-cylinder, 4-stroke, air-cooled, driving a fixed-pitch wooden
propeller. The front Starboard cylinder is numbered 1, the front Port is numbered 2, the
centre Starboard is numbered 3, the centre Port is numbered 4, the rear Starboard is
numbered 5 and the rear Port cylinder is numbered 6.
Refer to Engine Instruction & Maintenance Manual for detailed engine data.
For repair & overhaul of the engine, refer to the applicable publication issued by Jabiru
Aircraft Pty Ltd.
11.2.1
ENGINE DATA
Refer Engine Instruction & Maintenance Manual
11.2.2
ENGINE TROUBLE SHOOTING
Refer Engine Instruction & Maintenance Manual
11.2.3
ENGINE CLEANING
Refer Section 3.3
11.2.4
ENGINE ACCESSORIES REMOVAL
Removal of engine accessories for inspection involves stripping the engine of parts,
accessories & components as appropriate. During removal of all parts, carefully examine
& tag defective parts for repair or replacement with a new part.
NOTE:
All openings exposed by the removal of an item should be closed by installing a
suitable cover or cap over the opening. This will prevent the entry of foreign
particles. If suitable covers are not available, tape should be used to cover the
opening.