Remote Control System TT801 – User Guide
MU-TT801-AN rev.6 September 2009
27
III.4 Configuring the Transmission/Reception Parameters
III.4.1 D
EFINITIONS
This menu is used to set up transmission and reception parameters without saving the
configuration. The access to this sub-menu is allowed by pressing
1
key in the menu
TX /
RX settings
.
This menu is used for the management of a Database of instruments to be triggered with
TT801 cabinet. It helps to Save / Load / Erase the transmission and reception parameters.
The access to this sub-menu is allowed by pressing
2
key in the menu
TX / RX settings
.
Monochromatic Interrogation
The user can configure a monochromatic (tonal) single Interrogation pulse; in this case,
the parameters to set are the following:
•
The TYPE: RT6xx, RT8xx or RT9xx
•
The TRANSMIT TYPE:
Either the Individual Interrogation Frequency, IIF or the Common Individual
Frequency CIF for the RT8xx and RT9xx
Either the FR1 or FR2 for the RT6xx
•
The transmit frequency FREQ: 8.5 to 16 kHz with incremental step of 0.5 kHz
•
The recurrence type: Manual (MANUAL) or automatic (AUTO)
•
The transmission rate (RATE), between 2 and 31s, if AUTO has been chosen for
the recurrence
Immediate
Settings
Database
Access
Transmission
Parameters
Summary of Contents for TT801
Page 1: ...TT801 Remote Control System User Guide...
Page 2: ......
