IXSEA TT801, User Manual

Page: 11 / 94

Remote Control System TT801 – User Guide
MU-TT801-AN rev.6 September 2009 3
Table 1 – Correspondence between the ‘Interrogate’ or ‘Reply’ frequency names and targets
For: OIAR701 OIRT6x1 OIAR6x1 OIRT8x1 OIAR8x1 OIRT9xx OIAR9xx
Individual
Interrogation
frequency name
NA FR2 NA IIF NA IIF NA
Common
Interrogation
frequency name
NA FR1 NA CIF NA CIF NA
Individual Reply
frequency name
NA FT1 NA IRF NA IRF NA
Common Reply
frequency name
NA FT2 NA CRF NA CRF NA
Common
Acknowledgement
Frequency name
NA FT0 FT0 CAF CAF CAF CAF
Pinger Frequency NA FT4 NA PRF PRF PRF PRF
Other
Acknowledgement
frequencies
NA FT5, FT7
generally
set to FT0
NA NA NA NA NA
The main commands supported by the different generations of OCEANO Acoustic
Releases and Release Transponders are listed hereafter:
•
ARM : it precedes the commands/orders for OCEANO AR701AE, AR/RT/ET800,
AR/RT/ET900 series and operates like a unique address
•
RELEASE : Used with AR/RT 600 series, OCEANO AR/RT 800 and OCEANO
AR701AE to activate the release operation
•
DIAGNOSTIC : Used with RT600, OCEANO AR/RT800 and AR/RT900 series to ask
for information about the verticality and battery voltage of the acoustic release.
•
INT/RANGE : Used with AR600 series to measure distance from surface to the
acoustic release.
•
WINDOW : Possible use with RT600 series and may precede some RT600 series
commands/orders requiring an ARM & EXECUTION sequence. It operates like a
unique address and provides the same action as the ARM command. It allows
range measurement by sending the WINDOW command
•
ON FR1-FR2 : Used with RT600 series to enable FR1 and FR2 Transponder
channels.
•
OFF FR1-FR2-PINGER : Used with RT600 series to disable FR1 and FR2
Transponder channels and Pinger mode