Iwatsu Omegatrek PS6, Owner'S Manual

Page: 320 / 386

ATTENDANT CONSOLE USER GUIDE - 300
CALL SWAP
Allows you to alternate between the outside calling party (the source) and
the requested extension user (the destination) during the process of
transferring a call without having to use the Hold key
HOLD
. This feature
will only work if the called party answers by picking up the receiver.
Operation
To alternate between the outside call and the extension user (the destination)
during the process of transferring a call:
)
Press the Swap key SWAP or SPLIT if assigned and the key
will flash red
Or
)
Press the red flashing Source key
SOURCE
to speak with the
outside call or press the Destination key
DEST
to speak with
the extension if assigned as keys
The Attendant Position may be programmed to have either a Swap
key or Source and Destination keys, but not both.
CCSU SERIAL NUMBER / ECS SOFTWARE VERSION
DISPLAY
The IX-CCSU Serial Number and ECS Software Version Display feature
allows a technician or user to display the last six digits of the IX-CCSU
Serial Number and the ECS Software Version from any attendant position.
Operation
To view the IX-CCSU Serial Number and ECS Software Version:
)
Dial F 93.
Only Iwatsu attendant stations with a two-line display can display
this information. Iwatsu Platinum Series 12i/d telephones can only
display the IX-CCSU serial number (top system line) and not the
ECS software version on the second line of the display.