Iwatsu Omegatrek PS6, Owner'S Manual

Page: 62 / 386

GENERAL DESCRIPTION - 42
STATION INTERFACE CARDS
The station interface cards interface the system universal ports to the
individual station terminals. The following types of cards are available for
the various station terminal applications.
EIGHT-PORT IP STATION CARD
(IX-8IPSUB / IX-8EIPSUB)
The IX-8IPSUB/IX-8EIPSUB card provides eight IP station ports for use
with the IX-12IPKTD IP Telephone. The IX-8EIPSUB is a daughterboard
card that can receive power from either the IX-8IPSUB (for a combined total
of 16 IP station ports) or the IX-8IPNET (for a combined total of 8 IP
Networking ports and 8 IP Station ports). The IX-8IPSUB/IX-8EIPSUB
card connects to the Ethernet-based local area network (LAN) and requires
one port per card on the LAN switch.
Station Ports: 8 ports/card.
1 ECS TDM port required for:
IX-12IPKTD.
Note: The IX-8IPSUB/IX-8EIPSUB cards are not required for the IX-
12IPKTD-E IP Telephone.
EIGHT-PORT DIGITAL STATION CARD
(IX-8PSUB-2)
The IX-8PSUB-2 is designed specifically for the IX-5800 and IX-5810
Digital Key Telephones. This card is the interface for up to 8 IX-5800 and/or
IX-5810 digital stations to the ECS. Each circuit of the IX-8PSUB-2 card is
star connected to an IX-5800 or IX-5810 digital telephone using #22/24
AWG one-pair twisted cable. Single-pair cable allows for bi-directional data
transmission or
ping-pong transmission. The loop limit of ECS digital
station terminals is 1,000 feet. The loop limit can be extended to a maximum
of 2,100 feet using IX-58EXTENDER installed in the KT.
The IX-400-2 daughterboard is an optional card for the IX-8PSUB-2 that
interfaces central office/PBX circuits that provide caller ID service to the
IX-CME Gateway Controller. The IX-400-2 daughterboard supports central
office loop start trunks.
Ports: 8 ports/card.(and 4 loop start trunks with IX-400-2 card)
Stations: 1 port required for: IX-5800/IX-5810
Note: Legacy Iwatsu telephones and devices, including the DCKT970, DDPH
doorphone, PSUBMDM, IX-12KTD-3, Platinum 18d and 12d are not
compatible with the IX-8PSUB-2 or IX-16PSUB-2. These telephones may
only be connected to the IX-16PSUB, IX-8PSUB, IX-408, or IX-044 cards.