Operation Manual – ITW GSE 6400 Tier 3
e) Update/Save
Log
Menu
The Update/Save Log Menu is accessed from the Icon screen. Press the center navigation button
●
while in the
default menu and hold it down for approximately 5 seconds. The Icon menu is displayed, press the right
navigation button then the down button to highlight the Update/Save Log icon.
Update/Save Log – Menu structure
10:30:00
USB MENU 28/06/2013
Update Display Software
Update Control Card Software
Save Logs
◄
Back
●
Select
Highlight the by using the navigation
◄▼▲►
keys.
Press
●
to select ”Update/Save Log Menu” sub-menu.
The default function ”Update Display Software”
is green highlighted. If another function is wanted, use
the the
▼
/
▲
to highlight the function.
Before pressing
●
to select ”Update Display Software”,
please remember to insert a USB stick into the USB port
on the Display (located on the side of the Display
enclosure inside the unit).
Press
●
to select the function.
Press
●
to confirm update firmware.
The firmware is now being uploaded to the display card.
Upload % is counting from 0% to 100%. The system
automatically reboots if the update is successful.
Otherwise, an Update has failed! Message is displayed.
10:30:00
USB MENU 28/06/2013
Update in Progress
Do not turn off or reset during update
18%
10:30:00
USB MENU 28/06/2013
USB Firmware Update Detected
Do you wish to update?
Press
●
to update firmware
10:30:00
USB MENU 28/06/2013
Updating Display
Update Succesful! Please Reboot!
OM2254 Rev A
Page 50 of 103
