Operation Manual ITW GSE 6400 Tier 3
WARNING
ENSURE
adequate ventilation before starting the engine
.
2) Start engine and operate under full load (using a resistive load bank or aircraft) until coolant
temperature has reached a minimum 176ºF (80ºC).
3) While engine is running, ensure normal operating controls are in good working condition
before shutdown and storage. If weekly operation is not possible, contact nearest engine
manufacturer distributor for instructions.
3) Preparation for Shipment
a) Disconnect battery negative terminal before shipping.
b) During long shipments, vibration, jolting, etc may loosen the generator set retaining hardware.
CAUTION
When shipping unit, provide sufficient retaining materials to ensure generator set
cannot roll out or off the vehicle in which it is being transported.
NOTE:
It is suggested strong banding is used to secure generator set.
OM2254 Rev A
Page 29 of 103
