Operation Manual ITW GSE 6400 Tier 3
9) Check engine lubricating oil level. The oil gauge rod has “H” high-level and “L” low-level
marks to indicate operating lubrication oil supply. Oil level should be kept as near the high
mark as possible, without going over. See Figure 1-2-1 for capacity.
CAUTION
NEVER
operate engine with oil level below
“L”
level or above
“H”
level mark.
NOTE:
See Engine Manufacturer’s Operation Maintenance Manual for oil recommendations.
Figure 1-2-2: Oil Fill and Oil Level Check Locations
10) Check batteries located inside the right-side cable tray. Inspect batteries for proper
connection of terminals. Service or replace if necessary.
Oil Fill Cap
Dipstick
OM2254 Rev A
Page 27 of 103
