Operation Manual – ITW GSE 6400 Tier 3
CAUTION
1. If a cleaning compound is used, select one that is free from acid and will not
remove paint.
2. Protect (or remove) all electrical accessories, such as voltage regulator, alternator,
and electrical wiring.
3. Seal all openings. DO NOT use a flammable solvent.
4.
DO NOT
use mineral spirits or solvents on a hot engine.
5. Remove or protect bottom panel of unit (belly pan) to protect insulation.
b) Clean
Fuel
System.
See engine manufacturer’s operation manual for instructions.
c) Check Alternator and Cranking Motor.
The alternator and cranking motor on this engine require no periodic lubrication.
i) “F” Checks and Operations (2000 Hours or 2 Years).
1) Engine.
a) Check Vibration Damper.
Check vibration damper for looseness, wobble, chunking and streaking. Also verify the hub
bolts are tightened to the engine manufacturer’s specifications.
Refer to the engine manufacturer’s operations and maintenance manual for assistance
and the most update to date information.
b) Check
Charge-Air-Cooler
and
Radiator
Systems.
i.
Check for damaged hoses and loose or damaged hose clamps.
ii.
Check the radiator for leaks, damage, and build-up of dirt in the fins. Clean or
replace as necessary.
c) Flush
cooling
system
and
change
coolant.
OM2254 Rev A
Page 62 of 103
