20
Next, press the Coupling Insert into place and screw the Coupling Housing to
the Drive Unit.
Use the Hexagon Socket Head Cap Screws M4x18 [d] included with the Drive
Set to secure the motor to the gearbox of the Linear Unit. Use the Hexagon
Socket Head Cap Screws M5x1 [b] included with the Drive Set to secure the
gearbox to the Adapter Plate of the Drive Set.
Working through the Coupling Housing, create a friction-based connection
between the clamping hub screw (T = 9.6Nm) of the clamp coupling half and
the drive shaft.
First, use a rubber mallet to carefully position the centring disc on the motor
side of the drive Reverse Unit. Next, use the longer Hexagon Socket Head
Cap Screws DIN 912 from the pre-prepared Drive Set to replace the fastening
screws and inserted nuts for the two halves of the Drive Unit.
The longer screws enable connection of the Coupling Housing. Next, insert
Coupling Half KLE centrally into Drive Unit KLE and screw it into place. When
doing so, the Coupling Half must be secured to prevent it from turning.
Tightening torque for the fastening screw in the Coupling Half:
KLE 6 60x60:
T
T
= 10 Nm
KLE 8 80x80:
T
T
= 20 Nm