TM3215,3245,3265
64
LUBRICATION DETAILS
Grease Fittings
Lubricate all grease fittings (refer to Fig. 6-1,6-2,6-3 &
6-4) every 50 hours of operation using No.2 multipur-
pose lithiumbase grease. Clean the grease gun and fit-
tings before and after greasing to prevent contamination
from dirt.
NOTE: When operating in muddy or extremely wet
con-ditions, daily lubrication of fittings is recom-
mended.
SERVICE ACCESS
CAUTION: Shut off engine before servicing
Tractor. Engine hood side panels and front
grille must be Installed and secured prior to
operating unit.
To access radiator, battery and engine components, top
of engine bonnet can be opened, both hood side panels
and front grill can be easily removed.
FIGS. 6-5 & 6-6: To open;
turn locking knob, 1, one-
quarter turn clockwise on top of engine bonnet, pull up-
ward the bonnet and lock it by retaining stay, 2.
Reinstall in reverse order, engine bonnet will be neces-
sary to be pulled and closed,1, and then turn one-quar-
ter turn counterclockwise to secure.
FIGS. 6-7,6-8 & 6-9:
To remove side panels;
Pull out the upper portion of
side panel and remove the side panel as lifting up to up-
per direction.
Hook the lower front and rear parts of side panel from
top, and fix with upper front and rear two hookes as
pushing side panel to inward.
1
FIG. 6-5
2
FIG. 6-6
FIG. 6-7
FIG. 6-8
