INSTRUMENTS & CONTROLS
33
IMPORTANT: Always disengage front drive axle when
operating in conditions with minimal
wheel slippage (DRY OR HARD SUR-
FACES).
IMPORTANT: If tire replacement is necessary, identical
replacements must be installed to main-
tain correct front/rear axle ratio.
REAR PTO SELECTOR LEVER
FIG. 4-23:
Rear PTO (power takeoff) selector lever, 1,
controls rear PTO on tractor.
When lever is backward, 540 rpm rear PTO is selected.
When returned to rear neutral (N) position, the gear le-
ver is disengaged. (In case of independent clutch model)
Rear PTO selector lever is operated with PTO control
switch on instrument panel. Refer to “Operation” selec-
tion for complete details.
IMPORTANT: Before moving rear PTO selector lever,
PTO control switch on steering column
must be off.
CAUTION: Always shut off PTO and shut off
tractor engine before servicing PTO-driven
implement. Allow all movement and motion
to stop before leaving operator’s seat.
MID PTO SELECTOR LEVER
FIG. 4-25:
The mid PTO selector lever, 1, controls the
mid PTO on the tractor.
When the lever is shifted Forward, the mid PTO oper-
ates.
When lever is returned, neutral is selected, and the mid
PTO will stop rotating.
The mid PTO selector lever should be used with the
PTO control switch on the instrument panel. Refer to the
“Operation” section for complete details.
IMPORTANT: The PTO control switch must be set to
Off when the mid PTO selector lever is
operated.
1
FIG. 4-23
5 4 0
M
FIG. 4-24
1
FIG. 4-25
