
TM3215,3245,3265
26
Indicator Light Strip
FIG. 4-5:
Indicator light strip contains several warning
lights to monitor certain functions. Currently used posi-
tions (from left to right) are:
(1) 4WD - Lights up when 4WD is engaged. Lights off
when 2WD is engaged.
(2) Glow - Lights up when Glow position.
(3) Parking - Lights up when parking brake is en-
gaged. Light off when parking brake is not
engaged.
(4) Hazard and Trailer - Lights up when hazard lamp
is “ON” or lights up when winker is “ON”
with trailer.
(5) Battery Charge - Lights up when main switch is
turned “ON” and will go out after engine
starts, to indicate battery is being charged.
(6) Engine Oil Pressure - Lights up if engine oil pres-
sure is low, if the light comes on while the
engine is running, shut off the engine im-
mediately and investigate the cause.
(7) PTO operation - Lights up when PTO switch is
“ON” (Only for HST-type)
(8) Main (High) Beam - Lights up when the headlamps
in the front grill are selected to the high
beam position by the lamp switch.
(9) Fuel Gauge - The fuel gauge indicates the level of
diesel fuel in the fuel tank when the starter
switch is ON.
NOTE: Use only clean diesel fuel and clean area to
prevent dirt / water into fuel tank when refilling.
DO NOT run out of fuel as bleeding air from the
system will be required. Keep fuel tank full to
minimize condensation.
CAUTION: DO NOT refill fuel tank with en-
gine running or hot. Allow cooling period.
DO NOT smoke near fuel tank and clean up
any spilt fuel.
(10) Water Temperature Gauge - Indicate the radiator
water tempreature when starter switch is
“ON”.
NOTE: The gauge can not indicate an accurate fuel
level when the tractor is on a incline. It takes a
little time to indicate an accurate level after the
tractor recovers its horizontal position limit.
4
g
†
b
o
M l
P
1
2
3
4
5
6
9
10
11
7
8
FIG. 4-5