SAFETY
13
(6) When moving the machine toward an implement
for the purpose of installing the implement, never
allow any one to stand in between. When installing
the implement on the machine, be prepare to
move away promptly in the event of an emergency.
The brakes should be applied securely during
installation.
■
INSPECTION AND MAINTENANCE
(1) When servicing the tractor or mounting or
dismounting an implement, place the tractor on
level, hard ground which is sufficiently illuminated,
or unexpected accidents may occur.
(2) When servicing the tractor, follow the instructions
listed below:
・
Apply parking brakes.
・
Disengage all PTO.
・
Place all gear shift levers in neutral.
・
Remove the starter key.
・
Lower the implement fully, if equipped. If not, your
hands or clothes may be caught or sandwiched
between.
(3) When servicing the tractor, use proper tools. Using
makeshift tools may lead to injuries or poor service,
which may result in unexpected accidents during
operation.
(4) The engine, muffler, radiator, etc. are very hot
just after operation, so wait until they cool down
sufficiently to avoid burns.
(5) Never remove the radiator cap while the engine is
hot or running. Wait until the engine cools down and
then relieve the radiator pressure by releasing the
radiator cap. Carelessly pouring cooling water into
the heated radiator can cause serious damage to
the radiator and the engine.
Careless removal of the radiator cap can cause
serious injury because of overheated water vapour.
(6) Never fit unauthorized implements or attempt
unauthorized modification.
