TM3215,3245,3265
12
Specifications of the ramps
・
Length more than 4 times the height of the platform of the truck
・
Width (effective width) ..................................... more than 35 cm
・
Capacity (one ramp) .................................... more than 1000 kg
・
Ramps should have anti-skid surfaces
(8) Hook the ramps securely on the platform of the
truck with the top of the ramp level with the platform.
(9) Always prepare for even the worst, never allowing
other persons near the tractor.
(10) Drive the tractor carefully at the moment the tractor
moves from the ramps onto the platform, for it
changes angle abruptly.
■
DURING OPERATION
(1) During operation, never allow other persons in the
vicinity of the tractor, because the tractor itself or
flung pieces may cause injury.
(2) Pay attention to safety around the tractor to
avoid injury to bystanders or damage to property.
Especially when operating with other persons, use
the horn to warn them.
(3) When crossing a ditch or a levee or when passing
through soft land, drive the tractor slowly and
straightforward so that it does not slip or turn over.
(4) Do not touch dangerous parts such as rotating
parts, moving parts, hot parts (muffler, radiator, or
engine, etc. ) , or electric parts (battery terminals
and other live parts ), or you may be injured
seriously.
(5) If you use a trailer, use a proper one which starts
your tractor. Using an improper trailer may cause
serious accidents. Never attempt to haul beyond
the tractor's capacity. If you have a question, please
consult your ISEKI dealer.
