ISG18GFP USER MANUAL, GENERAL, SECTION G
UM-G-iSG18GFP-4.5.06.1-EN.docx
50
© 2020 IS5 COMMUNICATIONS INC. ALL RIGHTS RESERVED
6.8.4 PoE Commands Description
Table 13 – PoE Commands Description
Command
Description
Config terminal
Go to Global Configuration mode.
Interface <type> <port id>
Enter the specific Interface.
Only fastethernet ports are applicable. Permissible
values: Fastethernet <1-8>
Poe
No shutdown: port is POE enabled.
Shutdown: port is POE disabled. (default)
poe-power
Detect: POE will be available only upon negotiation
with a POE connected load device. (default)
Manual: POE will be available constantly.
Caution: connect only POE capable load devices
to ports which are in Manual mode.
show poe-status port <>
Show the POE state of the port. Port number is in the
range 1-8, when related to fastethernet 1-8.
6.9 Cellular Ports
Cellular Port Description
2SIM-LTE1
Dual SIM LTE Modem with 3G fallback, International
2SIM-LTE2
Dual SIM LTE Modem with 3G fallback, Americas (AT&T, Generic)
2SIM-LTE3
Dual SIM LTE Modem with 3G fallback, Americas (Verizon)
2SIM-LTE4
Dual SIM LTE Modem with 3G fallback, Americas (Sprint)
2SIM-LTE5
Dual SIM LTE Modem with 3G fallback, Americas (Bell, Rogers, Telus)
6.10 Controlling Ports
6.10.1 Storm Control
Sets the storm control rate for broadcast, multicast, and DLF packets.
6.10.2 Rate Limit Output
Enables the rate limiting and burst size rate limiting by configuring the egress packet rate of an interface. The no
form of the command disables the rate limiting and burst size rate limiting on an egress port.
6.11 Ports Command Hierarchy
+ Root
+ config terminal
+ interface
[range] <type> {<port id>| <iface_list>}
-
[no]
alias
DESCRIPTION
