ISG18GFP USER MANUAL, GENERAL, SECTION G
UM-G-iSG18GFP-4.5.06.1-EN.docx
48
© 2020 IS5 COMMUNICATIONS INC. ALL RIGHTS RESERVED
6.5.1 Default State
Table 11 – Ports Default States
Vlan id / port
Gi 0/3
Gi 0/4
Vlan 4092
Tagged
Vlan 4093
Tagged
Vlan 1
Tagged (pvid)
Tagged
The ACE ports properties should not be changed from their default auto-negotiation and hybrid state settings.
6.5.2 VLAN Assignment
The assignment of an ACE port to a VLAN is always as a tagged member.
The following table summarizes the ports VLAN membership depending on the network planning.
Table 12 – Ports Default States
Networking / port
Gi 0/3
Gi 0/4
Serial tunneling
Service VLANs
Terminal Server
Service VLANs
Gateway
Service VLANs
L2 VPN
NNI Vlan
UNI VLAN
L3 VPN
NNI Vlan
IPsec
NNI Vlan
Cellular
Firewall
Service VLANs
6.6 Ports FE 0/9-16
The usage of ports FE 0/9 -16 (FE Ports SFP) is dependent on the hardware option as follows:
•
iSG18GFP-MV-HV-D-8RJ45-
2GSFP-4SFP-4SFP
-SE
•
iSG18GFP-MV-HV-D-8RJ45-
2GSFP-4SFP
-XX-SE
•
iSG18GFP-MV-HV-D-8RJ45-
2GSFP
-XX-XX-SE
With hardware versions of ET28 these ports properties should not be changed from their default settings of auto-
negotiation and hybrid state.
6.7 Serial Ports
There are hardware options with 4 x RS-232 RJ45 Serial Ports (4SRJ45.) with 2kV Isolation- iSG18GFP- 2GSFP-
4SRJ45 or iSG18GFP- XX- 4SRJ45.
6.8 PoE Ports
Depending on your hardware variant PoE ports may be available. PoE is supported at the RJ45 ports only.
