ISG18GFP USER MANUAL, GENERAL, SECTION G
UM-G-iSG18GFP-4.5.06.1-EN.docx
70
© 2020 IS5 COMMUNICATIONS INC. ALL RIGHTS RESERVED
An output example of a show command with pagination set to on:
iSG18GFP# show running-config
#Building configuration...
snmp trap syslog-server-status
!
no smtp authentication
!
!
queue 1 interface fastethernet 0/1 qtype 1 scheduler 1 weight 1 queue-type unicast
!
queue 3 interface fastethernet 0/1 qtype 1 scheduler 1 weight 1 priority 2 queue
-type unicast
!
--More—
7.13 MAC-Address Table (FDB)
7.13.1 Port Mac Learning Limit
The Administrator can enable or disable the Mac Learning Status of each port. By default, each port in the bridge is
allocated a limit on the number of Mac addresses that is learnt on that port. The Mac Learning Limit on each port is
configurable. The Mac Learning Limit is applicable only for the dynamically learnt entries.
7.13.2 Commands Hierarchy
+ root
+ config terminal
- set mac-learning { enable | disable }
- unicast-mac learning limit <100-16000>
- mac-address-table aging-time <sec (300,10-1000000)>
- mac-address-table static unicast
<MAC>
vlan
<vlan id>
interface
<type> <id>
- no mac-address-table static unicast
<MAC>
vlan
<vlan id>
+ interface
<type> <port id>
-
switchport
unicast-mac learning
[enable | disable]
