CHAPTER:
CONFIGURATION ENVIRONMENT,
SECTION:
GCE COMMANDS DESCRIPTION
UM-G-iSG18GFP-4.5.06.1-EN.docx
© 2020 IS5 COMMUNICATIONS Inc. ALL RIGHTS RESERVED
Command
Description
auto-save trigger
Enables / disables the auto save trigger
function.
Rollback { enable | disable }
Enables/disables the rollback function.
set switch maximum – threshold
Sets the switch maximum threshold values of
RAM, CPU, and Flash
set switch temperature – threshold
Sets the maximum and minimum temperature
threshold values of the switch in Celsius.
mac-learn-rate
Configures the maximum number of unicast
dynamic MAC (L2) MAC entries hardware can
learn on the system
system contact
system location
clear interfaces – counters
clear counters
show ip interface
show authorized-managers
show interfaces
show interfaces – counters
show interface mtu
show interface bridge port-type
show nvram
Displays the current information stored in
the NVRAM.
show env
Displays the status of the all the resources
like CPU, Flash and RAM usage, and also
displays the current, power and temperature
of the switch.
show system information
Displays system information.
show flow-control
show debug-logging
show debugging
show clock
show running-config
show http server status
show mac-learn-rate
port-isolation in_vlan_ID
show port-isolation
