ISG18GFP USER MANUAL, GENERAL, SECTION G
UM-G-iSG18GFP-4.5.06.1-EN.docx
60
© 2020 IS5 COMMUNICATIONS INC. ALL RIGHTS RESERVED
Command
Description
login authentication
[{radius | tacacs}] [local]
Radius
: Sets the RADIUS server to be used as an
authentication server. Enables remote access servers to
communicate with a central server to authenticate dial-
in users and authorize their access to the requested
system or service.
TACACS
: Sets the TACACS server to be used as an
authentication server. Communicates with the
authentication server commonly used in networks.
Local
: Sets local authentication. The user
identification, authentication, and authorization
method are chosen by the local system administration
and does not necessarily comply with any other
profiles.
Default
: local
default
Default
: Sets the default authentication method for
User Logins.
[no] username
Set a new user.
Username:
2-32 characters’ length.
- Must start with A..Z or a..z
-
Allowed small and capital letters.
- Allowed numbers: 0-9
-
Allowed special symbols: – and _
Password:
8-32 characters’ length.
-
Must include at least one small letter.
-
Must include at least one
capital letter.
- Must include at least one number or special symbol.
- Allowed symbols: @#$%^&*()-+./<\`
- Username is not allowed to be inside the password.
- Swapped username is not allowed.
- Three consecutive similar letters are not allowed.
Privilege: 1-15.
show alias
Displays the aliases
7.3 Password Commands Hierarchy
+ configure terminal
-
password max-life-time [<days (0-180)>]
-
password validate char [lowercase] [uppercase] [numbers] [symbols]
-
password warning-life-time [<days (0-14)>]
7.4 Password Change Procedure (GCE/ACE)
When changing a GCE password:
1.
In CLI root, go to configure terminal by typing
configure terminal.
2.
Type
username
<string>
privilege
(1-15) [instead of <string> write the name of the username and set the
privilege level according to the number, 1 for lowest and 15 for highest].
