CHAPTER:
LOGIN AND MANAGEMENT,
SECTION:
LOGIN AUTHENTICATION COMMANDS DESCRIPTION
UM-G-iSG18GFP-4.5.06.1-EN.docx
© 2020 IS5 COMMUNICATIONS Inc. ALL RIGHTS RESERVED
ACE
-
user change password uname <string>
-
user pwd-life-time [set-max] [set-warning]
-
user show active-users
7.2 Login Authentication Commands Description
Table 15 – Login Authentication Commands Description
Command
Description
Under configure terminal (config) command
authorized-manager ip-source
Adds a specific authorized manager according to an IP
source.
[no] suffix in the beginning of the command will
removes a specific authorized manager from the list of
authorized managers.
<ip_addr>
Sets the network or host address from which the secure
gateway is managed. An address 0.0.0.0 indicates 'Any
Manager'.
<ip_mask>
Sets the subnet mask for the configured network or host
address. The configured subnet mask should be in the
same subnet of the network in which the secure gateway
is placed.
interface
Configures the type of physical interface to be used by
the authorized manager. The values can be:
Fastethernet | Gigabitethernet | port-channel
<port_list>
vlan <port_list>
Sets the list of VLANs or a single specific VLAN in
which the authorized manager can reside.
Service
Configures the type of service to be used by the
authorized manager. The values can be:
http | https | snmp | ssh | telnet
