Change the Application Setting — Alarm - Motion Detection.
Please follow the steps below to enable changes in the motion detection function of the alarm
Set the motion d
1. Click
the
Motion Detection
button on the left side of the Alarm to enter the “Alarm – Motion
Detection” page.
through the network if necessary.
etection:
2.
Click and drag the mouse across a targeted zone to draw a red rectangle on the image
(coordinates provided below).
NOTE:
You can set more than one targeted zone depending on your requirement.
Submit
f the recording.
turn to the home page.
3.
Enables / disables the motion detection function.
4.
Set up the signal level.
the
button to submit the new setting o
5. Click
6. Click
the
Home
button to re
Description of function keys:
The targeted zone:
Click and drag the mouse across the targeted zone to draw a red rectangle
Detection Range:
The red rectan
dinates.
Motion Detection:
This option enables / disables the motion detection function.
Sensitivity Level:
You can select any one of the given options for the setup signal level or just
type in the value of Customized Threshold.
on the image.
gle’s coor
Save:
Click to save the motion detection range.
50
Summary of Contents for DDK-1000
Page 2: ......
Page 104: ...Figure 6 102 ...
