IPX DDK-1000 Installation & Operation Manual Download Page 6

Page: 6 / 106

1. PRODUCT FEATURES

1.1 Product Instructions

This user-friendly device combines cutting-edge sophistication with practical reliability and

convenience. It features the self-downloading automatic video codec and other components, and is

very easy to set up. You can access the network to get smooth images through the real-time and

synchronized audio / visual stream provided by the device, because it supports two compression

modes, the MJPEG and the MPEG4 -- you can change from one to the other as you wish. The

MPEG4 file format is a very small size file, so it can save more images over a longer time and can

be set extremely fast. The device also has a built-in website server providing many Internet

functions and protocols, including the MDIX protocol which recognizes both the normal and the

crossover cables, either of which can connect up with an Ipxcam.

We hope this device makes it easier for you to get your IP address information. This unit supports

the USB interface which helps you to very easily get an IP address to open the IE browser: now just

type in your IP address to the browser and you can access your Ipxcam.

The device can hopefully provide the advanced motion detection function to improve your network

surveillance with both the powerful and enhanced multi-zone and multi-sensitivity modes of

detection. We believe this unit is the right answer to all your network surveillance problems. Try it

and you'll see.

1.2 Product Features

◆

The installation of a Codec or execution file is not necessary. The Ipxcam will

automatically send the Codec or any component to a PC if the latter requires it.

◆

Supports two compression modes, the Motion - JPEG and the MPEG4. You can

change from one to another as you wish.

◆

The MPEG4 is a very small size file, so it can save more images over a longer time and

can be sent extremely fast.

◆

Real - time synchronization of the video and audio functions.

◆

No latency. The unit will directly power on and run.

Summary of Contents for DDK-1000











































































































Search results

Summary of Contents for DDK-1000

Reviews:

Related manuals for DDK-1000

Brands by name

Popular brands

IPX DDK-1000, Installation & Operation Manual

Search results

Summary of Contents for DDK-1000

Reviews:

Related manuals for DDK-1000

Brands by name

Popular brands