IPX DDK-1000 Installation & Operation Manual Download Page 9

Page: 9 / 106

2. DESCRIPTION OF THE FRONT/REAR VIEW

2.1 Front Panel and Rear Panel

-- Front Panel --

-- Rear Panel --

I/O

DC5V

ETHERNET

VIDEO

1. MICROPHONE:

The

Ipxcam

has an additional audio function. The device has a microphone built into its front

panel which records sound.

2. ALARM I/O & RS-232 Port:

The RS-232 communication port functions as a connector to an external control device. This
port includes ALARM OUT, GROUND, ALARM IN, and ALARM RECOVER for connecting with
external devices.

WARNING:

You can't use general RS-232 cables to link up with the I/O connectors in the rear

panel of the device (please see the next page for further details).

3. VIDEO OUT Connector:

The connector provides the unit’s composite video signals to a monitor.

4. Plug

Inlet:

A DC 5V inlet that connects to an external power supply.

5. ETHERNET 10/100 Connector:

This is a standard RJ-45 connector for 10/100 Mbps Ethernet networks.

Summary of Contents for DDK-1000











































































































Search results

Summary of Contents for DDK-1000

Reviews:

Related manuals for DDK-1000

Brands by name

Popular brands

IPX DDK-1000, Installation & Operation Manual

Search results

Summary of Contents for DDK-1000

Reviews:

Related manuals for DDK-1000

Brands by name

Popular brands