IPX DDK-1000, Installation & Operation Manual

Page: 80 / 106

6. ADVANCED OPERATION
Ques
How t
Deskt
televis
◇
The
There are three way to get the IP address: Scan IP, Upnp and IP function.
Scan IP: Please refer to
Upnp: Please ref
IP fu
Questio
How to s SD
card f crosoft
Intern
◇ Set up the motion detection
1. Click the application button in the home page.
2. Click the Motion detection button on the left side of the page to enter the “ALARM –
MOTION DETECTION” page.
3. Click and drag the mouse left button across a targeted zone to draw a red rectangle on
the image. You can also draw the other targeted zones as you wish.
4. Please Enable the motion detection function.
5. Set up the sensitivity level from: Lowest, Low, Medium and High to Highest.
6. Click the Submit button to submit the setting.
◇
Recording the images into an SD card while the motion detection function is
working
1. Click the application button in the home page.
2. Click the Enable button below the ALARM item on the left side of the page to enter the
tion 1:
o view the live images of the Ipxcam via the Microsoft Internet Explorer on the
op PCs or the laptop computers in a situation where there are no monitors or
ion?
way to get the IP address of the Ipxcam without a monitor:
APPENDIX 1 .
er to APPENDIX 2 .
nction: Please refer to APPENDIX 3 .
n 2:
et up the motion detection area and its sensitivity? How to record into the
or 30 seconds when the motion has been activated and use the Mi
et Explorer to view the recorded files?
78 78