IPX DDK-1000 Installation & Operation Manual Download Page 14

Page: 14 / 106

3.3 CONNECTING WITH A MULTIPLEXER

LAN CAMERA 1

LAN CAMERA 2

LAN CAMERA 16

TO LAN CAMERA VIDEO OUT BNC CONNECTOR

3.4 UPDATING SYSTEM SOFTWARE

If the system software of the Ipxcam

needs to be upgraded, please take the following steps to

safely process it.

Important: Before carrying out the following procedures, please ensure the SD card is

working and the file of the system firmware is intact

1. Format an SD card using the FAT16 format if it is unformatted; there are no limitations to an SD

card’s capacity.

2. Create a directory named IPXCAM in the SD card if it does not exist.

3. Copy the file of UPDATE.BIN to the IPXCAM -directory.

4. If the Ipxcam is running, please power it off first.

5. Insert the SD CARD into the Ipxcam.

6. Remove the Ethernet cable from the RJ-45 port and then power on the Ipxcam.

7. In 5 to 10 seconds, a message reading "UPDATE PROCESSING" will show up on the screen on

a blue background; if not, please check out steps 1 to 6 carefully or else inform your technical

support while ignoring the following steps.

8. DO NOT power off the Ipxcam while this update process is running until the message "UPDATE

OK RESET PLEASE" appears on the screen; it might take 15 to 30 seconds to appear.

Summary of Contents for DDK-1000











































































































Search results

Summary of Contents for DDK-1000

Reviews:

Related manuals for DDK-1000

Brands by name

Popular brands

IPX DDK-1000, Installation & Operation Manual

Search results

Summary of Contents for DDK-1000

Reviews:

Related manuals for DDK-1000

Brands by name

Popular brands