IPX DDK-1000 Installation & Operation Manual Download Page 57

Page: 57 / 106

5.2 The Ipxcam IP Surveillance

talling and using the IP surveillance and Image Viewer,

ped

with

ystem Requirements

um 1.5 GHz processor or above (2.8 GHz or higher recommended).

In the multi-channel recording mode, the HD data transfer rates must be 66MB or above (100MB

5.2.1

ion to IP surveillance

esktop or

Store, search, and review recorded video from a PC and SD card.

Change a regular record, event record, and timer properties.

Before you are ready to view images from a desktop, you need to have your Ipxcam

networked by obtaining a 10/100 base-TX Ethernet data cable (Standard RJ-45) to connect

the Ipxcam to your LAN/WAN. Now enter the main menu to set the IP address.

This section provides instructions for ins

which are included with the Ipxcam. The programs can be operated by a selected PC equip

the following requirements.

Intel Penti

128-MB RAM at least (256-MB or higher recommended).

Windows 2000, XP or above.

4 MB VGA card capable of 24-bit true color display.

100 MB free hard-disk space for software installation.

10/100 Base-TX network for LAN operation.

The Microsoft Internet Explorer 6 above.

or higher recommended).

Introduct

The IP surveillance allows you to access many units of the Ipxcam from a remote d

a laptop in a TCP/IP networking environment. It can perform the following functions.

View live images from the Ipxcam.

Summary of Contents for DDK-1000











































































































Search results

Summary of Contents for DDK-1000

Reviews:

Related manuals for DDK-1000

Brands by name

Popular brands

IPX DDK-1000, Installation & Operation Manual

Search results

Summary of Contents for DDK-1000

Reviews:

Related manuals for DDK-1000

Brands by name

Popular brands